Showing all 11 results

CABX 1100

ESD and Clean Room Solutions

<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />   <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)

CABX 350

ESD and Clean Room Solutions

<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />   <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)

CABX 600

ESD and Clean Room Solutions

<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />   <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)

CABX 850

ESD and Clean Room Solutions

<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>Various lengths starting from <strong>350mm to 3100mm</strong> available.</li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152504-1024x990.png" alt="" width="1024" height="990" />   <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152522.png" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)

CD-100M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 0.10~10 N・m / 1.0~100 kgf・cm / 1.0~90 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Meter 0.1-10 Kgf-cm

CD-10M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 1~100 c N・m / 0.10~10 kgf・cm /0.10~9 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Cedar Japan Torque Tester or Torque Meter: CD 100M Japanese Product. One of the most popular Torque tester in the

DI-4B-25

Screw Assembly Solutions

<h3>Best for daily Torque check of a small impact tool, an air/pneumatic screwdriver, and a high output electric screwdriver.</h3> <h3>The features of DI-4B-25:</h3> <strong>- Measurement is possible up to a maximum of 25 N-m.</strong> <strong>- It is the number counter of blows for impact tools.</strong> <strong>- Measurement in the state where the socket was</strong> <strong>attached is possible.</strong> <strong>High luminosity LED display</strong> LED is adopted as a display part. A numerical value can be read clearly also in a dark place. <strong> Auto-power-off</strong> A power source is automatically turned off after neglect for 5 minutes. <strong>Battery drive</strong> It can be used being unable to choose a place and convenient for carrying by the spot. An exclusive charger is attached. <strong>Display zero clearance</strong> The zero clearance of the measurements is automatically carried out in setting time. (A setup in 0.5 - 3 seconds is possible) #torquetester #torquemeter #pnuematictooltester #japanesetorquetester <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Tester 0.3-25 NM

DID-4 Digital Torque Driver

Screw Assembly Solutions

<h3>Various functions One Apparatus.</h3> <ul> <li>The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed Peak, Real Time and Peak Down measuring mode (selectable).</li> <li>800 data memory.</li> <li>Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing.</li> <li>Programmable screw tightening counter.</li> <li>Programmable Auto Zero function resets unit to zero for easy operation.</li> <li>Both CW and CCW operation.</li> <li>ASCII format output (USB).</li> <li>Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use.</li> <li>Torque: 4 N.m/40 Kgf.cm</li> </ul>   Yes-no decision conditions etc. can save upto five channels. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former. <img class="alignnone size-full wp-image-15083" src="https://advancetech.co.in/wp-content/uploads/2023/02/did-4-1.png" alt="" width="449" height="285" /> <img class="alignnone size-full wp-image-15084" src="https://advancetech.co.in/wp-content/uploads/2023/02/Did-4-2.png" alt="" width="449" height="449" /> <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Digital Screwdriver 0.02-4 NM

RX-802AS

Soldering Stations

<ul> <li><strong>Extra-Ordinary Tip Life.</strong></li> <li><strong>Quick Temperature Recovery.</strong></li> <li><strong>High Operator Efficiency.</strong></li> </ul>  

Extra-Ordinary Tip Life. Quick Temperature Recovery. High Operator Efficiency.  

TOKii-10TMS

Optical Inspection Solutions

<h3>Tokii-10TMS is a thermal analyzer camera that can be used for various PCB applications, especially PCB testing.</h3> <strong>Check and locate High temperature regions on your PCB during testing. </strong> <strong>You can also Set temperature alarms for a particular temperature range beyond which if temperature rises, the alarm goes off.</strong> <strong>What's more? You can also data log all the temperature values.</strong> <strong>Thermal camera comes with focus option.</strong> <strong>The instrument has high build quality and comes with software that can be installed on you windows PC. The software is easy to use.</strong> • Locate current leakage and short circuit • Circuit design simulation assistance • Macro view of circuit board components • 3D thermal field distribution analysis • High temperature alarm tracking • Regional temperature curve record • USB direct connection to computer • Full analysis of 52,000 temperature points • Fast and stable metal bracket • Freely expandable structural design <img class="alignnone size-full wp-image-15062" src="https://advancetech.co.in/wp-content/uploads/2023/03/Tokii-10TMS-description.png" alt="" width="1995" height="2475" />   <h4><strong>Optional Experiment box (buy extra)</strong></h4> ● Adjustable size of wire hole suit for different lines ● 50mm thermal imaging observation window which can observe the whole PCBA ● Acrylic high transmittance shell to ensure airtightness and can check the placement of PCBA. ● USB cable with temperature sensor can plug in and acquire temperature data instantly ● The size of the experiment box is 110mm*90mm*60mm <img class="alignnone size-full wp-image-15061" src="https://advancetech.co.in/wp-content/uploads/2023/03/Tokii-10Tms-Box.png" alt="" width="2517" height="2480" /> <h4><strong>Features Of Optional Experiment Box </strong></h4> ● Simulate the heating condition of the PCBA in a closed environment ● Verify dissipation effect of the heat dissipation materials ● Combined verification of temperature sensor & thermal imaging temperature measurement ● Evaluate the heat dissipation of product with IP54 or above ● New dissipation design to replace the traditional probe ● Large-aperture observation hole for check the heating status conveniently ● Passing hole is convenient for power cable connection ● The temperature sensor shows the box heating status ● Temperature trend record for review the temperature rising data of long- time work ● Support temperature data export by Excel format ● Over-limit temperature can be automatically photographed for further PCBA analysis ● Fully USB connection, convenient and fast <h5>For more information download the datesheet or contact us.</h5> #thermalanalyzer #thermalcamera #thermaltesting #PCBtesting #PCBsimulation   <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>      

Thermal Analyzer For Various Applications  

TOKii-ECOSDM

Other Solutions

Shoes Dispenser