CP-2015-10
Soldering Consumables and Accessories
<strong>· Does not intentionally contain halogens.</strong> <strong>· RMA non-wash flux is used. (J-STD-004: ROLO)</strong> <strong>· Plain-knitting wick recommended for lead-free applications with high heat conduction.</strong> <strong>· Anti-static case.</strong> <strong>· Contains silica gel to reduce quality degradation.</strong> <strong>· With convenient zipper bag.</strong> <ul> <li><strong>RoHS, MSDS</strong></li> </ul>
CP-20B
Soldering Consumables and Accessories
<ul> <li><strong>Bargain extra-long wicks with spool. </strong></li> <li><strong>Makes it easy to take anywhere.</strong></li> <li><strong>Flat weaving; Easy heat transfer and hence easy desolder process.</strong></li> <li><strong>RoHS, MSDS</strong></li> </ul>
CP-3015-10
Soldering Consumables and Accessories
<ul> <li><strong>With convenient zipper bag.</strong></li> <li><strong>Contains silica gel to reduce quality degradation.</strong></li> <li><strong>Economical packs of 10pcs</strong></li> <li><strong>Does not intentionally contain halogens.</strong></li> <li><strong>RMA non-wash flux is used. (J-STD-004: ROLO)</strong></li> <li><strong>Plain-knitting wick recommended for lead-free applications with high heat conduction.</strong></li> <li><strong>Anti-static case.</strong></li> <li><strong>Contains silica gel to reduce quality degradation.</strong></li> <li><strong>With convenient zipper bag.</strong></li> <li><strong>RoHS, MSDS</strong></li> </ul> <div class="WaaZC"> <div class="RJPOee EIJn2"></div> </div>
CP-30B
Soldering Consumables and Accessories
<ul> <li><strong>Bargain extra-long wicks with spool.</strong></li> <li><strong>Makes it easy to take anywhere.</strong></li> <li><strong>RoHS, MSDS</strong></li> <li><span data-huuid="9505872630572963157"><strong>Brand:</strong> </span><span data-huuid="9505872630572963038">Goot</span></li> <li><span data-huuid="9505872630572962800"><strong>Application:</strong> </span><span data-huuid="9505872630572962681">Desoldering wick for removing excess solder</span></li> <li><span data-huuid="9505872630572962443"><strong>Material:</strong> </span><span data-huuid="9505872630572962324">Lead-free, ESD-safe, rosin flux desoldering braid</span></li> <li><span data-huuid="9505872630572962086"><strong>Performance:</strong> </span><span data-huuid="9505872630572961967">Absorbs solder quickly, efficient thermal transmission, and good heat response</span></li> <li><span data-huuid="9505872630572965825"><strong>Design:</strong> </span><span data-huuid="9505872630572965706">Thin and soft flat braid</span></li> <li><span data-huuid="9505872630572965468"><strong>Dimensions:</strong> </span><span data-huuid="9505872630572965349">3.0mm width x 20m length</span></li> <li><span data-huuid="9505872630572965111"><strong>Packaging:</strong> </span><span data-huuid="9505872630572964992">Packaged in a silica gel zipper to prevent corrosion and maintain performance</span></li> <li><span data-huuid="9505872630572964754"><strong>Suitability:</strong> </span><span data-huuid="9505872630572964635">Recommended for lead-free solder and applications with high heating loads, including BGA rework.</span></li> </ul> <div class="WaaZC"> <div class="RJPOee EIJn2"></div> </div>
GS-100
Soldering Consumables and Accessories
<ul> <li><strong>SELF-CLEANING SHAFT</strong> When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.</li> <li><strong>PLUNGER LOCK FUNCTION</strong> The plunger can be stored inside the shaft by pushing it in completely, and pressing the vacuum release button.</li> <li><strong>Compact storage.</strong></li> </ul> <div class="WaaZC"> <div class="RJPOee EIJn2"></div> </div>
GS-108
Soldering Consumables and Accessories
<ul> <li><strong>When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.</strong></li> <li><strong>A simple, plug-and-play device that doesn't require any software or complex setup.<span class="pjBG2e" data-cid="56a1cc35-8a4b-4fbb-8dff-cdc38ea7e826"><span class="UV3uM"> </span></span></strong></li> <li><strong>Compact design</strong></li> </ul> <div class="WaaZC"> <div class="RJPOee EIJn2"></div> </div>
NC-100R
Soldering Consumables and Accessories
The <strong data-start="121" data-end="143">NC-100R</strong> is a compact nitrogen generator and controller designed to provide a stable nitrogen supply for lead-free soldering applications. It separates nitrogen from compressed air using a special separation membrane and maintains a stable output pressure of 0.2 MPa. When combined with the RX-802ASPH, its two-tiered setup enables efficient operation while saving workspace. <ul> <li data-section-id="sz05dl" data-start="605" data-end="714"><strong data-start="607" data-end="676">Compact N2 station combining a nitrogen generator and controller.</strong></li> <li data-section-id="1s10otp" data-start="715" data-end="849"><strong data-start="717" data-end="760">Nitrogen generation density up to 99.5%</strong> at 0.7 MPa input pressure and 0.5 L/min flow rate.</li> <li data-section-id="1390cvp" data-start="850" data-end="949"><strong data-start="852" data-end="911">Recommended nitrogen generation flow rate of 1.0 L/min.</strong></li> <li data-section-id="mnxjba" data-start="950" data-end="1060"><strong data-start="952" data-end="992">Flow meter range of 0.5 to 4.0 L/min</strong> for controlled nitrogen flow.</li> <li data-section-id="1n2qqnx" data-start="1061" data-end="1144"><strong data-start="1063" data-end="1106">Input pressure range of 0.3 to 0.7 MPa.</strong></li> <li data-section-id="tv06bg" data-start="1145" data-end="1228"><strong data-start="1147" data-end="1190">Input temperature range of 5°C to 50°C.</strong></li> <li data-section-id="1si3y0v" data-start="1229" data-end="1338"><strong data-start="1231" data-end="1268">Stable output pressure of 0.2 MPa</strong> for consistent nitrogen supply.</li> <li data-section-id="eznpd9" data-start="1339" data-end="1475"><strong data-start="1341" data-end="1372">Special separation membrane</strong> separates nitrogen from compressed air produced by a compressor.</li> <li data-section-id="5b9eqr" data-start="1476" data-end="1597"><strong data-start="1478" data-end="1514">Two-tiered setup with RX-802ASPH</strong> enables efficient work in a smaller space.</li> <li data-section-id="bqm9fh" data-start="1598" data-end="1712"><strong data-start="1600" data-end="1644">Compact dimensions of 118 × 112 × 185 mm</strong> excluding protruding parts.</li> <li data-section-id="152r8jn" data-start="1713" data-end="1824"><strong data-start="1715" data-end="1742">Lightweight 2 kg design</strong> for convenient installation and handling.</li> <li><strong data-start="1959" data-end="1994">Anti-static and RoHS compliant.</strong></li> </ul>
TM-100SU
Soldering Consumables and Accessories
The <strong data-start="110" data-end="134">TM-100SU Sensor Unit</strong> is a compact sensor designed for measuring soldering tip temperatures in hard-to-reach places. It is compatible with the TM-100 and TM-200 tip thermometers and features a compact design with a 1.5 m cord for convenient positioning during measurement. The TM-100 or TM-200 is required for operation, as the TM-100SU cannot be used independently. <ul> <li data-section-id="zm4b3y" data-start="536" data-end="674"><strong data-start="538" data-end="561">Compact sensor unit</strong> designed for measuring soldering tip temperatures in hard-to-reach places.</li> <li data-section-id="ml614b" data-start="675" data-end="770"><strong data-start="677" data-end="714">Compatible with TM-100 and TM-200</strong> tip thermometers.</li> <li data-section-id="1uocoae" data-start="771" data-end="893"><strong data-start="773" data-end="816">TM-100 or TM-200 required for operation</strong>, as the TM-100SU cannot be used alone.</li> <li data-section-id="sib62c" data-start="894" data-end="995"><strong data-start="896" data-end="940">Dimensions: 64 (W) × 28 (H) × 100 (D) mm</strong>, excluding cord.</li> <li data-section-id="kf76hh" data-start="996" data-end="1054"><strong data-start="998" data-end="1016">Weight: 210 g.</strong></li> <li data-section-id="vuo7eb" data-start="1055" data-end="1143"><strong data-start="1057" data-end="1079">Cord length: 1.5 m</strong> with Ø4 mm cord diameter.</li> <li data-section-id="buts7m" data-start="1291" data-end="1350" data-is-last-node=""><strong data-start="1293" data-end="1312">RoHS compliant.</strong></li> </ul>
TOKii-200C
Soldering Consumables and Accessories
<ul> <li><strong>Compact size do not take much space</strong></li> <li><strong>This tip cleaning uses a smart infrared sensor for detection. When the soldering iron tip is inserted into the cleaning outlet, the device will begin cleaning automatically. When the soldering iron tip leaves the device, the cleaning automatically stops and enters dormant mode</strong></li> <li><strong>This device adopts an easily separable high-precision design, providing compact size, light weight, and consistent performance for easy maintenance.</strong></li> <li><strong>This device uses a concealed cleaning chamber design, prevents solder scrap from splashing.</strong></li> <li><strong>This design provides better safety, and protects the environment.</strong></li> <li><strong>This device provides highly efficient power consumption, saves energy.</strong></li> <li><strong>This device can clean the soldering iron tip quickly and Hard Oxides also, boosting your work</strong> <strong>efficiency.</strong></li> <li><strong>The upper and lower casing is fitted with magnetic control, providing secure closing while</strong> <strong>allowing easy opening. This design allows better tactile feedback and greater efficiency.</strong></li> <li><strong>Clean the solder residue tray or change Brush is quite easy</strong></li> </ul>
