CABX 1100
ESD and Clean Room Solutions
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
CABX 350
ESD and Clean Room Solutions
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
CABX 600
ESD and Clean Room Solutions
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
CABX 850
ESD and Clean Room Solutions
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1> <h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3> <ul> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li> <li>Various lengths starting from <strong>350mm to 3100mm</strong> available.</li> <li>To Know More about HDC-AC Technology, kindly contact us back.</li> </ul> <h2><strong>Main Features:</strong></h2> HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time. ❶ Increase in capacities ❷ Long-term stability of static elimination ❸ Reduce the abrasions in emitter needle ❹ Ultra low ozone ❺ Superior ion balance ❻ Minimum flow type nozzle ❼ Cleaning timer ❽ Emitter needle variation ❾ Safe features ● Improvement in both static elimination time and size (compared to conventional products) ● Small flow type discharge needle nozzle with low air consumption is also available. -Two types of discharge needle nozzles are available, normal flow nozzles (standard) and optional small flow nozzles (used for reduced compressor air consumption) -Easy to replace nozzles. -Kindly contact us back for air flow data. ● <strong>Pre-set cleaning schedule on timer</strong> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152504-1024x990.png" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152522.png" alt="" width="798" height="325" /> #ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
CD-100M
Screw Assembly Solutions
<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 0.10~10 N・m / 1.0~100 kgf・cm / 1.0~90 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
CD-10M
Screw Assembly Solutions
<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 1~100 c N・m / 0.10~10 kgf・cm /0.10~9 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
DI-4B-25
Screw Assembly Solutions
<h3>Best for daily Torque check of a small impact tool, an air/pneumatic screwdriver, and a high output electric screwdriver.</h3> <h3>The features of DI-4B-25:</h3> <strong>- Measurement is possible up to a maximum of 25 N-m.</strong> <strong>- It is the number counter of blows for impact tools.</strong> <strong>- Measurement in the state where the socket was</strong> <strong>attached is possible.</strong> <strong>High luminosity LED display</strong> LED is adopted as a display part. A numerical value can be read clearly also in a dark place. <strong> Auto-power-off</strong> A power source is automatically turned off after neglect for 5 minutes. <strong>Battery drive</strong> It can be used being unable to choose a place and convenient for carrying by the spot. An exclusive charger is attached. <strong>Display zero clearance</strong> The zero clearance of the measurements is automatically carried out in setting time. (A setup in 0.5 - 3 seconds is possible) #torquetester #torquemeter #pnuematictooltester #japanesetorquetester <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
DID-4 Digital Torque Driver
Screw Assembly Solutions
