CABX Series
ESD and Clean Room Solutions
<h5>HDC-AC Technology Miles Ahead in Ionization Technologies</h5> <ul> <li><strong>It is a Bar type Ionizer ELIMINOSTAT</strong></li> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li><strong>Ensures Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination while reducing cleaning frequencies.</strong></li> <li><strong>Various lengths starting from 350mm to 3100mm available.</strong></li> <li><strong>To Know More about HDC-AC Technology, kindly contact us back.</strong></li> <li><strong>Pre-set cleaning schedule on timer</strong></li> </ul> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152504-1024x990.png" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152522.png" alt="" width="798" height="325" />
DID-4
Digital Torque Screwdrivers
The <strong>DID-4 Digital Torque Driver</strong> is an ergonomic, lightweight, and ruggedly constructed torque screwdriver designed for accurate torque measurement and uniform screw tightening. It offers selectable Peak, Real Time, and Peak Down measurement modes, programmable high and low torque limits, and GO/NO GO judgment with audible and LED indicators. The unit also features five-channel setting memory, an adjustable screw tightening counter, Auto Zero function, 800-data memory, USB data output, and both clockwise and counterclockwise operation. <img class="size-full wp-image-15083 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2023/02/did-4-1.png" alt="" width="449" height="285" /> <ul> <li><strong>Measuring range of 0.20–40 kgf·cm</strong> for precise torque measurement.</li> <li><strong>Accuracy of ±0.5%</strong> with ±3 digits for readings of 499 digits or less.</li> <li><strong>Selectable measurement modes:</strong> Peak-to-Peak, Track, Peak-Down, and Real-Time Output.</li> <li><strong>CW and CCW operation</strong> supports clockwise and counterclockwise tightening.</li> <li><strong>GO/NO GO judgment function</strong> with programmable high and low torque limits.</li> <li><strong>Audible beep and Green/Red LED indicators</strong> provide clear tightening status feedback.</li> <li><strong>Five-set memory</strong> allows different tightening conditions to be saved and recalled easily.</li> <li><strong>Programmable screw tightening counter</strong> supports counting from 1 to 99 tightening operations.</li> <li><strong>Programmable Auto Zero function</strong> automatically resets the unit to zero for easy operation.</li> <li><strong>800-data memory</strong> stores measurement results for later reference.</li> <li><strong>Maximum, minimum, and average value display</strong> provides useful measurement statistics.</li> <li><strong>Real-time torque output</strong> approximately every 1/160 second.</li> <li><strong>USB ASCII data output</strong> with a baud rate of 19200.</li> <li><strong>4-digit LCD display</strong> provides clear measurement readings.</li> <li><strong>Rechargeable Ni-MH battery</strong> provides approximately 12 hours of continuous use after about 3 hours of charging.</li> <li><strong>Automatic power-off</strong> after 10 minutes of inactivity.</li> </ul>
DID-5
Digital Torque Screwdrivers
