Showing all 8 results

CD-100M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 0.10~10 N・m / 1.0~100 kgf・cm / 1.0~90 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Meter 0.1-10 Kgf-cm

CD-10M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 1~100 c N・m / 0.10~10 kgf・cm /0.10~9 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Cedar Japan Torque Tester or Torque Meter: CD 100M Japanese Product. One of the most popular Torque tester in the

CD-150M

Torque Meters/Testers

Torque Meter 1-150 Kgf-cm

DI-4B-25

Screw Assembly Solutions

<h3>Best for daily Torque check of a small impact tool, an air/pneumatic screwdriver, and a high output electric screwdriver.</h3> <h3>The features of DI-4B-25:</h3> <strong>- Measurement is possible up to a maximum of 25 N-m.</strong> <strong>- It is the number counter of blows for impact tools.</strong> <strong>- Measurement in the state where the socket was</strong> <strong>attached is possible.</strong> <strong>High luminosity LED display</strong> LED is adopted as a display part. A numerical value can be read clearly also in a dark place. <strong> Auto-power-off</strong> A power source is automatically turned off after neglect for 5 minutes. <strong>Battery drive</strong> It can be used being unable to choose a place and convenient for carrying by the spot. An exclusive charger is attached. <strong>Display zero clearance</strong> The zero clearance of the measurements is automatically carried out in setting time. (A setup in 0.5 - 3 seconds is possible) #torquetester #torquemeter #pnuematictooltester #japanesetorquetester <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Tester 0.3-25 NM

DID-4 Digital Torque Driver

Screw Assembly Solutions

<h3>Various functions One Apparatus.</h3> <ul> <li>The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed Peak, Real Time and Peak Down measuring mode (selectable).</li> <li>800 data memory.</li> <li>Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing.</li> <li>Programmable screw tightening counter.</li> <li>Programmable Auto Zero function resets unit to zero for easy operation.</li> <li>Both CW and CCW operation.</li> <li>ASCII format output (USB).</li> <li>Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use.</li> <li>Torque: 4 N.m/40 Kgf.cm</li> </ul>   Yes-no decision conditions etc. can save upto five channels. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former. <img class="alignnone size-full wp-image-15083" src="https://advancetech.co.in/wp-content/uploads/2023/02/did-4-1.png" alt="" width="449" height="285" /> <img class="alignnone size-full wp-image-15084" src="https://advancetech.co.in/wp-content/uploads/2023/02/Did-4-2.png" alt="" width="449" height="449" /> <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Digital Screwdriver 0.02-4 NM

TOKii-DTM10

Torque Meters/Testers

Torque Meter

TOKii-DTM100

Torque Meters/Testers

Torque Meter

TOKii-DTM250

Torque Meters/Testers

Torque Meter

A torque tester is used as a quality control device to test or calibrate torque-controlled tools. This includes electronic torque wrenches, click torque wrenches, dial torque wrenches, electric screwdrivers, air screwdrivers, pulse tools, cordless screwdrivers, nutrunners, and torque screwdrivers. Verifying that these tools are operating according to their specifications helps ensure the assembly process runs efficiently while reducing errors.

Today’s advanced torque testers include the ability to measure in clockwise and counter-clockwise directions, and potentially convert to engineering units (such as in·oz, in·lb, ft·lbN·m, cN·m, kgf·cm, gf·cm, kgf·fm).

Torque is defined as a vector quantity which refers to any force which causes rotation. Torque testers measure properties such as torsional strength and stiffness and are used in quality control of various fields including medical devices, metals, and aerospace.

By definition, torque meter is a type of transducer, specifically a torque transducer that converts a torque measurement (reaction, dynamic or rotary) into another physical variable, in this case, into an electrical signal that can be measured, converted and standardized. As the torque applied to the sensor increases, the electrical output signal changes proportionally (torque detector).

Modern torque meters typically combine a transducer and digital display. The digital display reads signals from the transducer, translating it into torque values for display on screen. A transducer (also called strain gauge or stress sensor) typically made of metal whose resistance varies in response to applied forces; its output converts this change in resistance into electrical current that can then be translated into torque measurements using algorithms.Browse our, https://www.swisswatch.is/product-category/richard-mille/rm-030/ with a variety of options to suit every taste and budget, available to buy online.

Highly Accurate Torque Meters From Cedar Japan:

Since 1971 Cedar is known for its accuracy in products and unique tools for torque management in the world and they have actively developed “what is not in the world”.

Cedar torque meters or torque testers are known in the world for high accuracy. They implement their own unique method of torque measurement and are regarded as the best torque meters in the world. Most Screw driver manufacturers in the world trust Cedar for testing their tools.
That’s not all, even the Research and development centers rely on torque meters from Cedar.

Cedar makes all kinds of torque testers, be it for your Electric Tools, Pneumatic Tools, Pulse Tools, Impact Tools, Compact Tools, Cordless Screwdrivers, Nut Runners, Wrenches etc.

The Torque meters come with digital display and you can also export the data or link with PC in some of the testers. Most of them come with features such as peak data hold, auto shut down, auto reset etc.

They also have unique Torque Meters for torque wrenches and impact tools and even pulse tools.

Special Torque meters are there for Screw inspection (Slip Torque Tester) which is a patented equipment and Rotation Friction torque.