<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1>
<h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3>
<ul>
<li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li>
<li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li>
<li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li>
<li>To Know More about HDC-AC Technology, kindly contact us back.</li>
</ul>
<h2><strong>Main Features:</strong></h2>
HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time.
❶ Increase in capacities
❷ Long-term stability of static elimination
❸ Reduce the abrasions in emitter needle
❹ Ultra low ozone
❺ Superior ion balance
❻ Minimum flow type nozzle
❼ Cleaning timer
❽ Emitter needle variation
❾ Safe features
● Improvement in both static elimination time and size
(compared to conventional products)
● Small flow type discharge needle nozzle with low air
consumption is also available.
-Two types of discharge needle nozzles are available, normal
flow nozzles (standard) and optional small flow nozzles (used for reduced
compressor air consumption)
-Easy to replace nozzles.
-Kindly contact us back for air flow data.
● <strong>Pre-set cleaning schedule on timer</strong>
The LED lights up to notify the cleaning time of the discharged
needle based on the preset light up schedule. The schedule
can be preset by the timer. There are 9 patterns can be set
between 100 to 10000 hours. It is also possible to preset as
light off.
●<strong> Variation of the discharge needle</strong>
The silicon discharge needle can be used for an environment
where it does not allow small amount of dust.
●<strong> Safety features</strong>
Slight discharge detection with low voltage of DC 24V input
ensure safety during operation.
<img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />
<img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" />
#ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization
<pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1>
<h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3>
<ul>
<li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li>
<li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li>
<li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li>
<li>To Know More about HDC-AC Technology, kindly contact us back.</li>
</ul>
<h2><strong>Main Features:</strong></h2>
HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time.
❶ Increase in capacities
❷ Long-term stability of static elimination
❸ Reduce the abrasions in emitter needle
❹ Ultra low ozone
❺ Superior ion balance
❻ Minimum flow type nozzle
❼ Cleaning timer
❽ Emitter needle variation
❾ Safe features
● Improvement in both static elimination time and size
(compared to conventional products)
● Small flow type discharge needle nozzle with low air
consumption is also available.
-Two types of discharge needle nozzles are available, normal
flow nozzles (standard) and optional small flow nozzles (used for reduced
compressor air consumption)
-Easy to replace nozzles.
-Kindly contact us back for air flow data.
● <strong>Pre-set cleaning schedule on timer</strong>
The LED lights up to notify the cleaning time of the discharged
needle based on the preset light up schedule. The schedule
can be preset by the timer. There are 9 patterns can be set
between 100 to 10000 hours. It is also possible to preset as
light off.
●<strong> Variation of the discharge needle</strong>
The silicon discharge needle can be used for an environment
where it does not allow small amount of dust.
●<strong> Safety features</strong>
Slight discharge detection with low voltage of DC 24V input
ensure safety during operation.
<img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />
<img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" />
#ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization
<pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1>
<h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3>
<ul>
<li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li>
<li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li>
<li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li>
<li>To Know More about HDC-AC Technology, kindly contact us back.</li>
</ul>
<h2><strong>Main Features:</strong></h2>
HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time.
❶ Increase in capacities
❷ Long-term stability of static elimination
❸ Reduce the abrasions in emitter needle
❹ Ultra low ozone
❺ Superior ion balance
❻ Minimum flow type nozzle
❼ Cleaning timer
❽ Emitter needle variation
❾ Safe features
● Improvement in both static elimination time and size
(compared to conventional products)
● Small flow type discharge needle nozzle with low air
consumption is also available.
-Two types of discharge needle nozzles are available, normal
flow nozzles (standard) and optional small flow nozzles (used for reduced
compressor air consumption)
-Easy to replace nozzles.
-Kindly contact us back for air flow data.
● <strong>Pre-set cleaning schedule on timer</strong>
The LED lights up to notify the cleaning time of the discharged
needle based on the preset light up schedule. The schedule
can be preset by the timer. There are 9 patterns can be set
between 100 to 10000 hours. It is also possible to preset as
light off.
●<strong> Variation of the discharge needle</strong>
The silicon discharge needle can be used for an environment
where it does not allow small amount of dust.
●<strong> Safety features</strong>
Slight discharge detection with low voltage of DC 24V input
ensure safety during operation.
<img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152504-1024x990.png.webp" alt="" width="1024" height="990" />
<img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/webp-express/webp-images/uploads/2023/02/Screenshot_20230224_152522.png.webp" alt="" width="798" height="325" />
#ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization
<pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)
<h1><strong>Bar Type Ionizer Eliminostat CABX</strong></h1>
<h3>HDC-AC Technology Miles Ahead in Ionization Technologies</h3>
<ul>
<li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li>
<li>Ensures<strong> Long Term Stability of Ion Balance.</strong></li>
<li><strong>Faster Static Elimination</strong> <strong>while reducing cleaning frequencies.</strong></li>
<li>Various lengths starting from <strong>350mm to 3100mm</strong> available.</li>
<li>To Know More about HDC-AC Technology, kindly contact us back.</li>
</ul>
<h2><strong>Main Features:</strong></h2>
HDC-AC Technology ensures stable static elimination capacity with the feature of no requirement of cleaning over a long period of time.
❶ Increase in capacities
❷ Long-term stability of static elimination
❸ Reduce the abrasions in emitter needle
❹ Ultra low ozone
❺ Superior ion balance
❻ Minimum flow type nozzle
❼ Cleaning timer
❽ Emitter needle variation
❾ Safe features
● Improvement in both static elimination time and size
(compared to conventional products)
● Small flow type discharge needle nozzle with low air
consumption is also available.
-Two types of discharge needle nozzles are available, normal
flow nozzles (standard) and optional small flow nozzles (used for reduced
compressor air consumption)
-Easy to replace nozzles.
-Kindly contact us back for air flow data.
● <strong>Pre-set cleaning schedule on timer</strong>
The LED lights up to notify the cleaning time of the discharged
needle based on the preset light up schedule. The schedule
can be preset by the timer. There are 9 patterns can be set
between 100 to 10000 hours. It is also possible to preset as
light off.
●<strong> Variation of the discharge needle</strong>
The silicon discharge needle can be used for an environment
where it does not allow small amount of dust.
●<strong> Safety features</strong>
Slight discharge detection with low voltage of DC 24V input
ensure safety during operation.
<img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152504-1024x990.png" alt="" width="1024" height="990" />
<img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152522.png" alt="" width="798" height="325" />
#ionizers #barionizers #staticeliminator #staticchargeelimination #staticchargeremoval #ionization
<pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>
Ion Bar HDC-AC Technology ( Power Supply or Controller for Automatic On/Off Optional)
<h3>Tokii-10TMS is a thermal analyzer camera that can be used for various PCB applications, especially PCB testing.</h3>
<strong>Check and locate High temperature regions on your PCB during testing. </strong>
<strong>You can also Set temperature alarms for a particular temperature range beyond which if temperature rises, the alarm goes off.</strong>
<strong>What's more? You can also data log all the temperature values.</strong>
<strong>Thermal camera comes with focus option.</strong>
<strong>The instrument has high build quality and comes with software that can be installed on you windows PC. The software is easy to use.</strong>
• Locate current leakage and short circuit
• Circuit design simulation assistance
• Macro view of circuit board components
• 3D thermal field distribution analysis
• High temperature alarm tracking
• Regional temperature curve record
• USB direct connection to computer
• Full analysis of 52,000 temperature points
• Fast and stable metal bracket
• Freely expandable structural design
<img class="alignnone size-full wp-image-15062" src="https://advancetech.co.in/wp-content/uploads/2023/03/Tokii-10TMS-description.png" alt="" width="1995" height="2475" />
<h4><strong>Optional Experiment box (buy extra)</strong></h4>
● Adjustable size of wire hole suit
for different lines
● 50mm thermal imaging
observation window which can
observe the whole PCBA
● Acrylic high transmittance shell
to ensure airtightness and can
check the placement of PCBA.
● USB cable with temperature
sensor can plug in and acquire
temperature data instantly
● The size of the experiment box is
110mm*90mm*60mm
<img class="alignnone size-full wp-image-15061" src="https://advancetech.co.in/wp-content/uploads/2023/03/Tokii-10Tms-Box.png" alt="" width="2517" height="2480" />
<h4><strong>Features Of Optional Experiment Box </strong></h4>
● Simulate the heating condition of the PCBA in a closed
environment
● Verify dissipation effect of the heat dissipation materials
● Combined verification of temperature sensor & thermal imaging
temperature measurement
● Evaluate the heat dissipation of product with IP54 or above
● New dissipation design to replace the traditional probe
● Large-aperture observation hole for check the heating status
conveniently
● Passing hole is convenient for power cable connection
● The temperature sensor shows the box heating status
● Temperature trend record for review the temperature rising data
of long- time work
● Support temperature data export by Excel format
● Over-limit temperature can be automatically photographed for
further PCBA analysis
● Fully USB connection, convenient and fast
<h5>For more information download the datesheet or contact us.</h5>
#thermalanalyzer #thermalcamera #thermaltesting #PCBtesting #PCBsimulation
<pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>