CABX Series
ESD and Clean Room Solutions
<h5>HDC-AC Technology Miles Ahead in Ionization Technologies</h5> <ul> <li><strong>It is a Bar type Ionizer ELIMINOSTAT</strong></li> <li><strong>With HDC-AC Technology (Hybrid Digital Control-AC Technology) by SSD Japan</strong>.</li> <li><strong>Ensures Long Term Stability of Ion Balance.</strong></li> <li><strong>Faster Static Elimination while reducing cleaning frequencies.</strong></li> <li><strong>Various lengths starting from 350mm to 3100mm available.</strong></li> <li><strong>To Know More about HDC-AC Technology, kindly contact us back.</strong></li> <li><strong>Pre-set cleaning schedule on timer</strong></li> </ul> The LED lights up to notify the cleaning time of the discharged needle based on the preset light up schedule. The schedule can be preset by the timer. There are 9 patterns can be set between 100 to 10000 hours. It is also possible to preset as light off. ●<strong> Variation of the discharge needle</strong> The silicon discharge needle can be used for an environment where it does not allow small amount of dust. ●<strong> Safety features</strong> Slight discharge detection with low voltage of DC 24V input ensure safety during operation. <img class="alignnone size-large wp-image-14995" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152504-1024x990.png" alt="" width="1024" height="990" /> <img class="alignnone size-full wp-image-14996" src="https://advancetech.co.in/wp-content/uploads/2023/02/Screenshot_20230224_152522.png" alt="" width="798" height="325" />
CD-10M
Screw Assembly Solutions
The CD-10M Torque Meter is designed for accurate torque measurement and management of electric screwdrivers. It supports CW and CCW measurement with multiple measurement modes and selectable units. The meter stores up to 800 measurement data points and provides USB data output for easy analysis and record keeping. <ul> <li data-section-id="1k0p5mi" data-start="471" data-end="536"><strong data-start="473" data-end="493">Measuring range:</strong> 0.010–1 N-m, 0.10–10 kgf-cm, 0.10–9 lbf-in</li> <li data-section-id="2ddi96" data-start="537" data-end="571"><strong data-start="539" data-end="552">Accuracy:</strong> ±0.5% or ±2 digits</li> <li data-section-id="160xd05" data-start="572" data-end="611"><strong data-start="574" data-end="600">Measurement direction:</strong> CW and CCW</li> <li data-section-id="1fa50ze" data-start="612" data-end="711"><strong data-start="614" data-end="636">Measurement modes:</strong> T-R (Track), P-P (Peak-to-Peak), P-D (Peak-Down), and C (Real-time Output)</li> <li data-section-id="1m43z8b" data-start="712" data-end="771"><strong data-start="714" data-end="747">Selectable measurement units:</strong> N·m, kgf·cm, and lbf·in</li> <li data-section-id="w2ffqn" data-start="772" data-end="844"><strong data-start="774" data-end="809">High/low limit judging function</strong> with adjustable measurement limits</li> <li data-section-id="1aedrxf" data-start="845" data-end="893"><strong data-start="847" data-end="893">Maximum, minimum and average value display</strong></li> <li data-section-id="178zjw1" data-start="894" data-end="931"><strong data-start="896" data-end="916">Memory capacity:</strong> Up to 800 data</li> <li data-section-id="1vp8a" data-start="932" data-end="1013"><strong data-start="934" data-end="955">Real-time output:</strong> Load torque value output approximately every 1/180 second</li> <li data-section-id="ez1q9" data-start="1014" data-end="1067"><strong data-start="1016" data-end="1032">Data output:</strong> USB, ASCII format, 19200 baud rate</li> <li data-section-id="1thr6qj" data-start="1068" data-end="1120"><strong data-start="1070" data-end="1089">Auto power-off:</strong> After 10 minutes of inactivity</li> <li data-section-id="qhi2g2" data-start="1121" data-end="1210"><strong data-start="1123" data-end="1154">Rechargeable Ni-MH battery:</strong> Approx. 3-hour charging time and 12-hour continuous use</li> </ul>
RX-802AS
Soldering Stations
<strong data-start="462" data-end="525">RX-802AS Lead-Free Temperature-Controlled, Anti-Static (ESD) Soldering Station</strong> is a high-performance<strong> 80W Soldering Station</strong> designed for precision electronics assembly, repair, and continuous production environments. Featuring exceptional heat recovery technology, it maintains a stable tip temperature even during demanding lead-free soldering applications, ensuring consistent soldering quality and reliable performance. <hr /> <h4><strong>Key Features:</strong></h4> <ul> <li><strong>80 Watts: Low wattage, Compact </strong>lead-free temperature-controlled soldering station for precision electronics soldering suitable for production.</li> <li><strong>No Calibration Required:</strong> Auto-Calibration available if correct tip number is entered in settings.</li> <li data-section-id="14bu7i5" data-start="1874" data-end="1996"><strong>Temperature Range:</strong> <strong>50°C to 450°C</strong> with stable temperature control.</li> <li data-section-id="13uco96" data-start="1997" data-end="2127"><strong>Fastest In It's Class:</strong> Reaching the <strong>set temperature</strong> in approximately<strong> 6 seconds</strong>.</li> <li data-section-id="dn7o4x" data-start="2128" data-end="2282"><strong>Reduced Grip Heat (PAT.):</strong> Patented thermal-insulation grip permits comfortable and safe work.</li> <li data-section-id="j2trlc" data-start="2283" data-end="2400"><strong>Tip Replacement without Tools (PAT.):</strong> Slide-change tip. Easy and safe to replace a hot tip without the need of any other tools.</li> </ul> <img class="aligncenter wp-image-18591 size-full" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-tip-replacement.png" alt="" width="421" height="210" /> <ul> <li><strong>Ergonomic Anti-Static handpiece (ESD).</strong></li> <li><strong>Thick Tip Coating for Lead-free Soldering:</strong> All tips have extra-thick iron plating, to resist erosion by lead-free solder. Hence you get <strong>EXTRA-ORDINARY LONG TIP LIFE (PROVEN IN INDIAN INDUSTRY SINCE 1996)</strong></li> <li><strong>Password-Protected Key Lock and Digital Calibration:</strong> Ensures accurate temperature settings and prevent unauthorized changes.</li> <li><strong>Excellent Heat Recovery:</strong> Maintains<strong> consistent tip temperature</strong> during continuous lead-free soldering.</li> </ul> <img class="size-full wp-image-18592 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-tip-temp-recovery.png" alt="" width="395" height="223" /> <ul> <li data-section-id="11ab72n" data-start="2401" data-end="2552"><strong>Intelligent Sleep (PAT.) and Automatic Shutdown Functions:</strong> Help reduce oxidation, save energy, and extend tip life.</li> </ul> <img class="size-full wp-image-18589 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-intelligent-sleep-function.png" alt="" width="405" height="286" /><img class="size-full wp-image-18588 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-intelligent-shut-down-function.png" alt="" width="395" height="247" /> <ul> <li data-section-id="1dstb74" data-start="2553" data-end="2710"><strong>High/Low Temperature Alarm and Soldering Alarm Functions</strong> provide improved process monitoring and quality control.</li> </ul> <img class="size-full wp-image-18587 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-high-low-temp-alarm.png" alt="" width="407" height="136" /> <ul> <li data-section-id="w5rm3n" data-start="2880" data-end="2994"><strong>Soldering Alarm Functions (PAT.):</strong> For Temperature Sensitive Jobs/ Components</li> </ul> <img class="size-full wp-image-18590 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/802as-soldering-alarm-fucntion.png" alt="" width="396" height="182" /> <hr /> <strong>Note: </strong> <strong>Applicable Tips:</strong> RX-80HRT and RX-81HRT Series <strong>Applicable Iron Handpiece:</strong> RX-81GAS, RX-80GAS, and XST-80G Soldering Tweezers Unit (XST-80HRT tips applicable) This station can also be <strong>converted</strong> into <strong>Nitrogen compatible</strong> Soldering Station by adding <strong>Nitrogen Generator NC-100R</strong> and corresponding compatible <strong>Soldering Iron</strong>
RX-822AS
Soldering Stations
<strong data-start="207" data-end="280">RX-822AS Temperature-Controlled Lead-Free Dual-Port/ Dual-Channel Soldering Station</strong> is designed for high-efficiency electronics manufacturing and rework applications. <strong>Its dual-port design allows two soldering irons to operate simultaneously</strong>, making it ideal for handling multiple soldering tasks with improved productivity. Equipped with intelligent control functions and ergonomic handpieces, it delivers precise temperature control, operator comfort, and reliable lead-free soldering performance. It is an <strong>Anti-Static (ESD) Lead Free</strong> Soldering Station. <h4><strong>Key Features</strong></h4> <ul> <li data-section-id="13fdr1t" data-start="757" data-end="913"><strong data-start="759" data-end="790">Dual-port soldering station</strong> supports the simultaneous use of <strong data-start="824" data-end="847">two soldering irons</strong> for increased productivity.</li> <li data-section-id="97k3p5" data-start="914" data-end="1004"><strong data-start="916" data-end="966">Adjustable Temperature Range: 50°C to 450°C </strong>for both channels separately.</li> <li data-section-id="97k3p5" data-start="914" data-end="1004"><strong>Power Consumption: 220–260 W</strong></li> <li data-section-id="97k3p5" data-start="914" data-end="1004"><strong>Channel 1/ Port 1: 75 Watts</strong></li> <li data-section-id="97k3p5" data-start="914" data-end="1004"><strong>Channel 2/ Port 2: 150/ 75 Watts</strong> (depending on Tips being used)</li> <li><strong>No Calibration Required:</strong> Auto-Calibration available if correct tip number is entered in settings.</li> <li data-section-id="13uco96" data-start="1997" data-end="2127"><strong>Fastest In It’s Class:</strong> Reaches 350°C in only<strong> 14 seconds</strong>. (<strong>Only 6 seconds</strong> when using RX-80HRT tips).</li> <li data-section-id="1wm3e6k" data-start="1005" data-end="1144"><strong data-start="1007" data-end="1043">Independent Temperature Displays:</strong> Allow individual temperature settings for each soldering iron.</li> </ul> <img class="size-full wp-image-18607 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-individual-temp-setting.png" alt="" width="192" height="96" /> <ul> <li data-section-id="j21xcn" data-start="1145" data-end="1260"><strong data-start="1147" data-end="1181">Supports Chip Component Rework:</strong> Using two soldering tips simultaneously or XST-80G Soldering Tweezer Unit.</li> <li data-section-id="1sqsy4k" data-start="1261" data-end="1393"><strong data-start="1263" data-end="1297">Advanced Intelligent Functions (PAT.):</strong> Including <strong>Sleep Mode, Sleep Release, Automatic Shutdown, and Key Lock</strong> for efficient operation.</li> <li data-section-id="chuija" data-start="1522" data-end="1635"><strong data-start="1524" data-end="1576">Lightweight, Well-Insulated Ergonomic handpieces:</strong> Provides greater comfort during prolonged soldering tasks with <strong>Reduced Grip Heat (PAT.) </strong>(Patented thermal-insulation grip permits comfortable and safe work).</li> <li data-section-id="chuija" data-start="1522" data-end="1635"><strong> Anti-Static handpiece (ESD).</strong></li> <li><strong>Thick Tip Coating for Lead-free Soldering:</strong> All tips have extra-thick iron plating, to resist erosion by lead-free solder. Hence you get <strong>EXTRA-ORDINARY LONG TIP LIFE (PROVEN IN INDIAN INDUSTRY SINCE 1996)</strong></li> <li data-section-id="soafa5" data-start="1394" data-end="1521"><strong data-start="1396" data-end="1425">Tool-Free Tip Replacement:</strong> Enables quick and safe replacement of hot soldering tips.</li> </ul> <img class="size-full wp-image-18610 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-tip-replacement.png" alt="" width="405" height="195" /> <ul> <li><strong>Excellent Heat Recovery:</strong> Maintains<strong> consistent tip temperature</strong> during continuous lead-free soldering.</li> </ul> <img class="wp-image-18596 size-full alignleft" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-heat-recovery.png" alt="" width="157" height="115" /><img class="size-full wp-image-18611 alignleft" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-tip-tmp-recovery.png" alt="" width="388" height="228" /> <ul> <li><strong data-start="1941" data-end="1995">Digital Calibration and High/Low Temperature Alarm</strong> ensure precise temperature control and process reliability.</li> </ul> <img class="size-full wp-image-18606 alignleft" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-high-low-temp.png" alt="" width="385" height="130" /> <ul> <li><strong>Intelligent Sleep (PAT.) and Automatic Shutdown Functions:</strong> help reduce oxidation, save energy, and extend tip life.</li> </ul> <img class="size-full wp-image-18608 alignleft" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-intelligent-sleep.png" alt="" width="380" height="271" /> <img class="size-full wp-image-18609 alignleft" src="https://advancetech.co.in/wp-content/uploads/2026/10/822as-shutdown-function.png" alt="" width="393" height="227" /> <strong>Note:</strong> <strong>Applicable Tips: </strong> <strong>1) Channel 1/ Port 1 (75W):</strong> RX-80HRT and RX-81HRT Series <strong>2) Channel 2/ Port 2 (150 w): </strong>RX-85HRT , RX-80HRT and RX-81HRT Series <strong>Applicable Iron Handpiece:</strong> <strong>1) Channel 1/ Port 1 (75W): </strong>RX-81GAS, RX-80GAS, and XST-80G Soldering Tweezers Unit (XST-80HRT tips applicable) <strong>2) Channel 2/ Port 2 (150 w) : </strong>RX-85GAS, RX-81GAS, RX-80GAS, and XST-80G Soldering Tweezers Unit (XST-80HRT tips applicable) <div class="RJPOee EIJn2">This station can also be <strong>converted</strong> into <strong>Nitrogen compatible</strong> Soldering Station by adding <strong>Nitrogen Generator NC-100R</strong> and corresponding compatible <strong>Soldering Iron</strong></div>
RX-852AS
Soldering Stations
<strong data-start="183" data-end="246">RX-852AS Lead-Free Temperature-Controlled Soldering Station</strong> is a high-performance soldering solution designed for demanding electronics manufacturing and repair applications. Its exceptional heat recovery and rapid heating deliver stable tip temperature for continuous lead-free soldering. The ergonomic handpiece, intelligent control functions, and tool-free tip replacement ensure greater productivity, precision, and operator comfort. <h4><strong>Key Features</strong></h4> <ul> <li data-section-id="18i0ilg" data-start="729" data-end="846"><strong>150Watts: Low wattage, Compact</strong> high-performance lead-free Temperature-Controlled Soldering Station.</li> <li><strong>No Calibration Required:</strong> Auto-Calibration available if correct tip number is entered in settings.</li> <li data-section-id="1dlkizd" data-start="847" data-end="937"><strong>Temperature Setting Range:</strong> <strong>50°C to 450°C</strong>.</li> <li data-section-id="1dlkizd" data-start="847" data-end="937"><strong>Thick Tip Coating for Lead-free Soldering:</strong> All tips have extra- thick iron plating, to resist erosion by lead-free solder.</li> <li data-section-id="18qqy72" data-start="1518" data-end="1673"><strong>Password-Protected Key Lock</strong> and D<strong>igital Calibration:</strong> Ensure precise temperature control and process reliability.</li> <li data-section-id="jf62ta" data-start="1674" data-end="1771"><strong>Lightweight Ergonomic Handpiece:</strong> <strong>Reduces</strong> operator <strong>fatigue</strong> during prolonged soldering tasks.</li> <li data-section-id="lma11g" data-start="1772" data-end="1872" data-is-last-node=""><strong>Anti-Static (ESD-safe) and RoHS compliant.</strong></li> <li><strong>Fastest in Its Class:</strong> Fast heating reaches <strong>350°C in just 14 seconds</strong> <strong>(or 6 seconds with RX-80HRT tips)</strong>.</li> <li data-section-id="1qpo4ao" data-start="938" data-end="1105"><strong>Excellent Heat Recovery (PAT.):</strong> Excellent heat recovery has been achieved by combining a 150 W compact high-output heater with a high-sensitivity sensor.</li> </ul> <img class="size-full wp-image-18603 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-tip-temp-recovery.png" alt="" width="392" height="246" /> <img class="size-full wp-image-18596 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-heat-recovery.png" alt="" width="157" height="115" /> <ul> <li data-section-id="1dstb74" data-start="2553" data-end="2710"><strong>High/Low Temperature Alarm and Soldering Alarm Functions</strong> provide improved process monitoring and quality control.</li> </ul> <img class="size-full wp-image-18602 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-high-low-temp-alarm.png" alt="" width="382" height="136" /> <ul> <li data-section-id="11azfww" data-start="1239" data-end="1356"><strong>Tip Replacement without Tools (PAT.):</strong> Tool-free slide-change tip system enables quick and safe tip replacement.</li> </ul> <img class="size-full wp-image-18599 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-tip-replacement.png" alt="" width="400" height="185" /> <ul> <li data-section-id="o2m59t" data-start="1357" data-end="1517"><strong>INTELLIGENT SLEEP FUNCTION (PAT.):</strong> <strong>Intelligent Sleep Mode and Automatic Shutdown Functions</strong> help improve safety and extend tip life.</li> </ul> <img class="size-full wp-image-18597 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-intelligent-sleep-function.png" alt="" width="386" height="282" /> <img class="size-full wp-image-18598 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-shutdown-function.png" alt="" width="387" height="232" /> <ul> <li data-section-id="w5rm3n" data-start="2880" data-end="2994"><strong>Soldering Alarm Functions (PAT.):</strong> For Temperature Sensitive Jobs/ Components</li> </ul> <img class="size-full wp-image-18595 aligncenter" src="https://advancetech.co.in/wp-content/uploads/2026/10/852as-alarm-function.png" alt="" width="385" height="178" /> <strong>Note: </strong> <strong>Applicable Tips: </strong>RX-80HRT and RX-85HRT Series <strong>Applicable Iron Handpiece: </strong>RX-85GAS, RX-80GAS, RX-81GAS, and XST-80G Soldering Tweezers Unit (XST-80HRT tips applicable) This station can also be <strong>converted</strong> into <strong>Nitrogen compatible</strong> Soldering Station by adding <strong>Nitrogen Generator NC-100R</strong> and corresponding compatible <strong>Soldering Iron</strong>
TOKii-10TMS
Optical Inspection Solutions
