Product Highlights
The DID-05 Digital Torque Driver is designed for torque checking of machine screws from M0.8 to M2.0 and for checking the starting torque of rotating components such as volume hinges. Its lightweight 180 g construction helps reduce the influence of perpendicular force during measurement. The unit supports Peak, Real Time, and Peak Down measurement modes, with programmable high/low limits for GO/NO-GO torque testing.
- Measuring range: 2.0–500 mN-m / 0.020–5 kgf-cm / 0.020–4.5 lbf-in
- Accuracy: ±0.5% (499 or less digit ±3 digit)
- Applicable screws: M0.8–M2.0 machine screws
- Measurement modes: Peak, Track, Peak Down, and Real-time Output
- Measurement direction: CW-CCW (right and left)
- High/low limit judging: Programmable limits with audible beep and Green/Red LED indication; five-set preservation
- Data memory: 800 data
- Display: 4-figure digital LCD
- Data output: ASCII format, baud rate 19200
- Screw tightening counter: Programmable from 1 to 99 counts in the clockwise direction
- Power supply: Ni-MH rechargeable battery; approximately 3-hour charge time and 12-hour continuous use
- Auto functions: Programmable Auto Zero and auto power-off after 10 minutes of non-use
