BJS 600mm
AC Ion Bar ( power supply Optional)
Related products
TRZ-Cube
ESD and Clean Room Solutions
<ul> <li>With strong Vacuum fan , correct the particle that blown away inside box .</li> <li>Strong Air blow nozzel at up and down side. Installed three nozzels , two for upper sides and one for down side.</li> <li>Installed SSD HDC-AC Ionizer and perform fast decay performance</li> <li>Easy operation by timer controlled air blow.</li> <li>Effective four kinds of pulsed air blow</li> <li>Attached additional filter (1pc)</li> </ul>
BF-X2ME
ESD and Clean Room Solutions
<strong>WINSTAT BF-X2ME is a compact air ionizer with a lim and light-weight design. It has a long-term stable static elimination capabilities and prolonged duration for maintainance cycle.</strong> <strong>● Without feedback control, the ion balance is suppressed to ± 3V or less.</strong> <strong>● Increased long-term and stable performance by reduced abrasions and dust on the emitter needle.</strong> <strong>● Handy maintenance as it is easy to detach the louver and the emitter needle.</strong> <strong>● LED display and error output send out alarm signals on abnormal power or fan output.</strong> <strong>● Adjustable angle with lock function to prevent change of angle due to vibration.</strong>
BF-X4ZB
ESD and Clean Room Solutions
<strong>BF-X4ZB is a thin and ligh-weighted wide-range static eliminatior and</strong> <strong>high-frequency corona discharge air ionizer, which can remove static</strong> <strong>electricity in a range of 400m. Easy to maintain with longevity of</strong> <strong>maintenance duration.</strong> <strong>● Wide-area horizontal type static elimination blower upto 400mm.</strong> <strong>● Light-weighted by using resin casing and small type high-frenquency</strong> <strong>AC transformer.</strong> <strong>● Provide large airflows (continously changeable) by two 120mm fans</strong> <strong>to eliminate static electricity.</strong> <strong>● LED indicator and alarm signals when abrasion or uncleaness of the</strong> <strong>emitter needle is detected.</strong> <strong>● Easy to detach parts for maintenance, only need a finger press to detach</strong> <strong>louver and emitter needles.</strong> <strong>● Power turns off during the removal of louver.</strong> <strong>● Adjustable angle with lock function to avoid angle change due to</strong> <strong>vibration.</strong>
Dry Fog Humidifier
SMT Solutions
