Showing all 9 results

CD-100M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 0.10~10 N・m / 1.0~100 kgf・cm / 1.0~90 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Meter 0.1-10 Kgf-cm

CD-10M

Screw Assembly Solutions

<h3>Cedar Japan Torque Tester or Torque Meter: CD 100M</h3> <ul> <li>Japanese Product.</li> <li>One of the most popular Torque tester in the market.</li> <li>Accuracy of ±0.5%.</li> <li>For Management of torque of Electric Screw Driver.</li> </ul> <strong>Torque Range : 1~100 c N・m / 0.10~10 kgf・cm /0.10~9 lbf・in</strong> <strong>Features:</strong> (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.",. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily. (4) Calculation of Maximum, Minimum, and Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs. (9) Real-time Output is Every 1 / 180 Seconds. (10) 10 Minutes no use: automatically switch off. (11) Chargeable (12) High and Low limits judging function. (13) Compact Design. (14) Other Special different type joints available as optional. #torquetester #torquemeters #torquemanagement #screwassembly #torque #Testandmeasurement <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Cedar Japan Torque Tester or Torque Meter: CD 100M Japanese Product. One of the most popular Torque tester in the

CD-150M

Torque Meters/Testers

Torque Meter 1-150 Kgf-cm

DI-4B-25

Screw Assembly Solutions

<h3>Best for daily Torque check of a small impact tool, an air/pneumatic screwdriver, and a high output electric screwdriver.</h3> <h3>The features of DI-4B-25:</h3> <strong>- Measurement is possible up to a maximum of 25 N-m.</strong> <strong>- It is the number counter of blows for impact tools.</strong> <strong>- Measurement in the state where the socket was</strong> <strong>attached is possible.</strong> <strong>High luminosity LED display</strong> LED is adopted as a display part. A numerical value can be read clearly also in a dark place. <strong> Auto-power-off</strong> A power source is automatically turned off after neglect for 5 minutes. <strong>Battery drive</strong> It can be used being unable to choose a place and convenient for carrying by the spot. An exclusive charger is attached. <strong>Display zero clearance</strong> The zero clearance of the measurements is automatically carried out in setting time. (A setup in 0.5 - 3 seconds is possible) #torquetester #torquemeter #pnuematictooltester #japanesetorquetester <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Torque Tester 0.3-25 NM

DID-4 Digital Torque Driver

Screw Assembly Solutions

<h3>Various functions One Apparatus.</h3> <ul> <li>The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed Peak, Real Time and Peak Down measuring mode (selectable).</li> <li>800 data memory.</li> <li>Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing.</li> <li>Programmable screw tightening counter.</li> <li>Programmable Auto Zero function resets unit to zero for easy operation.</li> <li>Both CW and CCW operation.</li> <li>ASCII format output (USB).</li> <li>Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use.</li> <li>Torque: 4 N.m/40 Kgf.cm</li> </ul>   Yes-no decision conditions etc. can save upto five channels. A channel is only changed even if bolting conditions change. It is not necessary to reset up a maximum value and a minimum value one by one like former. <img class="alignnone size-full wp-image-15083" src="https://advancetech.co.in/wp-content/uploads/2023/02/did-4-1.png" alt="" width="449" height="285" /> <img class="alignnone size-full wp-image-15084" src="https://advancetech.co.in/wp-content/uploads/2023/02/Did-4-2.png" alt="" width="449" height="449" /> <pre>*pictures used here are for representative purposes only. Actual product might vary.</pre>

Digital Screwdriver 0.02-4 NM

DIW-120

Torque Wrenches

Torque Wrench Bolt Tightening 20~1200 kgf/cm

DIW-15

Torque Wrenches

Torque Wrench Bolt Tightening 2.0~150 Kgf-cm

DIW-20

Torque Wrenches

Torque Wrench Bolt Tightening 2.0~200 kgf/cm

DIW-75

Torque Wrenches

Torque Wrench Bolt Tightening 2.0~750 kgf/cm